User Tag List

Results 1 to 2 of 2

Thread: CompactLogix 5380 and PVPlus 7

  1. #1
    Member Snyder's Avatar
    Join Date
    May 2019
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    CompactLogix 5380 and PVPlus 7

    I have a compactlogix configured in dual IP. Port A1 is set to 192.168. 0.1 and communicating with my servo system. Port A2 is set to 172.16.151.1 an is communicating through a stradix 2000 to a panelview 7 set at 172.16.151.10. I can with the communication set up through factoryTalk I can test my run time application and it works fine , but when I transfer my runtime to the panelview it does not communicate all I get is ????????.

  2. #2
    Administrator Shawn Tierney's Avatar
    Join Date
    Sep 2016
    Location
    Berkshires, MA
    Posts
    2,331
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks Thanks Given 
    23
    Thanks Thanks Received 
    6
    Thanked in
    6 Posts
    Good afternoon @Snyder,

    First thing, can you check your RSLinx Enterprise Target Tab to see if the shortcut to the 5380 is correct?

    Also, what is the exact model of 5380 you are using, as well as version of ViewStudio and FW on your PVPlus?

    I ask because sometimes you have to flash your PVP7s to the latest minor rev to pickup support for newer controllers, unless the rev is really old then you may have to update the major rev.

    Hope this helps,

    Shawn Tierney,
    Instructor at TheAutomationSchool.com
    Looking for affordable automation training? If you are, check out my courses at TheAutomationSchool.com!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •