Search:

Type: Posts; User: Shawn Tierney

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds; generated 42 minute(s) ago.

  1. Then I would definitely recommend experimenting...

    Then I would definitely recommend experimenting with it, and I'm sure A-B has some great tech notes on the subject!

    You know, as a self employed instructor I just don't have the free time to...
  2. Replies
    3
    Views
    106

    Cliff, Yeah, Lite comes bundled with so much...

    Cliff,

    Yeah, Lite comes bundled with so much that financially it would probably make more sense to get it than add Safety to Mini,

    Sincerely,

    Shawn Tierney,
    Instructor at The Automation...
  3. Good afternoon maitrey27, It would be so much...

    Good afternoon maitrey27,

    It would be so much easier to send data back and forth between Micro800s over Ethernet using CIP since you would not have to do the Modbus Mapping.

    Sincerely,

    Shawn...
  4. Good afternoon maitrey27, I'll try to answer...

    Good afternoon maitrey27,

    I'll try to answer your questions below:

    1. What protocols does the Micro820 and Micro850 support?

    Inside CCW you'll see the Ethernet port supports:
    - CIP...
  5. jamesonline Great Points!

    jamesonline Great Points!
  6. Replies
    3
    Views
    106

    Good morning Cliff, According to Rockwell,...

    Good morning Cliff,

    According to Rockwell, you'll need Lite:

    https://literature.rockwellautomation.com/idc/groups/literature/documents/qr/9324-qr001_-en-p.pdf

    Sincerely,

    Shawn Tierney,...
  7. Replies
    3
    Views
    262

    Good morning @RonV5300...

    Good morning @RonV5300,

    I'm in the Studio today so I can't double check this, but I thought the A&E summary object only showed current and un-ack'd alarms, and the Log Viewer object was used to...
  8. Replies
    3
    Views
    262

    Good morning @RonV5300...

    Good morning @RonV5300,

    Some questions for you:
    - What version of View Studio are you using?
    - When you say normal alarms are showing, are you talking about current and un-acked A&E alarms show...
  9. Thanks for sharing your troubleshooting story...

    Thanks for sharing your troubleshooting story with us Paul!

    I wonder if the PID's settings couldn't avoid oscillating until after the system was warmed up and running smoothly?

    I've seen some...
  10. Thanks for your article Paul! Couldn't help...

    Thanks for your article Paul!

    Couldn't help but think of the line, "Don't Panic," and "Thanks for all the Fish!"

    Thanks again,


    Shawn Tierney
    Industrial Automation Blogger at...
  11. Thanks for your article Megan. When I first...

    Thanks for your article Megan.

    When I first read it, I wasn't convinced of the merits of some of the suggestions.

    I mean, using data collection to inform process improvement is definitely...
  12. Replies
    1
    Views
    89

    Thanks for your article Nilesh. I was a little...

    Thanks for your article Nilesh.

    I was a little surprised you could trip your turbine the way you did - turbine control companies I've work with in the past had to trip in something like 20ms.
    ...
  13. Great suggestions BobRichter!

    Great suggestions BobRichter!
  14. Hey jamesonline, I'm not seeing the difference...

    Hey jamesonline,

    I'm not seeing the difference in this video?

    When I was filming I thought the ControlNet came up much faster than the Ethernet, but don't think I got that on film?

    Shawn
  15. Replies
    1
    Views
    243

    Great question jamesonline, I'm going to have...

    Great question jamesonline,

    I'm going to have to think about that!
  16. I should probably also mention this is from 2004...

    I should probably also mention this is from 2004 ;-)
  17. So for anyone who comes across this thread, first...

    So for anyone who comes across this thread, first let me say the article this thread is for is:

    https://theautomationblog.com/micrologix-1200-to-powerflex-4-using-modbus/

    And the manuals my...
  18. Good afternoon LcAuto, So you're using...

    Good afternoon LcAuto,

    So you're using MicroLogix with the 4m and Modbus? Last time I ran into an issue doing this is was that the address was off by 1 as some modbus devices are 0 based, and some...
  19. Just ran into this issue again! Must have been...

    Just ran into this issue again!

    Must have been when I added v31 and v32 my launcher got reset?
  20. Good afternoon rkkongus, Since all PVPlus 7...

    Good afternoon rkkongus,

    Since all PVPlus 7 models only communicate via Ethernet, it's odd that you can't set yours up?

    At this point I would first double check that it is in fact a PVP7, and...
  21. Good afternoon @itzel...

    Good afternoon @itzel,

    Can you ping your router?

    In my office my router is setup as 192.168.1.1.

    Whenever I have an issue with a VM, I first check to see if I can ping my router to be sure...
  22. Good afternoon maedeh, The path depends on the...

    Good afternoon maedeh,

    The path depends on the model of PVPlus you have - you can exit to the desktop of your PVP, and then navigate to the memory card in Fil Explorer to see the path, or check...
  23. Good morning @Alzorrilla...

    Good morning @Alzorrilla,

    I can think of a number of things which can cause that, and to narrow it down can you share:

    1) What version of FT you are using, and is it SE or ME?

    2) How is your...
  24. Replies
    3
    Views
    429

    Thanks for letting us know Engineer!

    Thanks for letting us know Engineer!
  25. Replies
    3
    Views
    429

    Good morning Engineer, I've never run into...

    Good morning Engineer,

    I've never run into that error myself, but Rockwell does have a tech not on it (and you can contact them directly for free Micr0800 support)
    ...
Results 1 to 25 of 497
Page 1 of 20 1 2 3 4